Window Specifications

Home

Window Specs

Circular

Square/Rectangular

Elliptical

Solid Etalons

Wedged

Parallel

MgF2/CaF2

General Window Specifications -

Materials: BK-7, UVFS, SSI, SSII, Infrasil available on request Standard Thickness Range: Product Dependent Surface Figure: λ10 @ 632.8nm over clear aperture Surface Quality - 10-5 over clear aperture Parallelism: 1.0 arc second to 5 arc minutes (product dependent) Wedge Window Tolerance: Specified wedge +/- arc minutes Clear Aperture - 85% of central dimension Dimensional Tolerance: Diameter/Length/Width: +0.00 / -0.250mm Thickness: +/-0.250mm std. - +/-0.001 mm achievable Chamfer: 0.350mm X 45o typical

	General Window Specifications -
	Materials: MgF2, CaF2 Standard Thickness Range: product Dependent Surface Figure: λ/4 @ 632.8nm over clear aperture Surface Quality - 40.20 over clear aperture Parallelism: 5 arc minutes Wedge Tolerance: Specified wedge +/- 5 arc minutes Clear Aperture - 85% of central dimension Dimensional Tolerance: Diameter/Length/Width: +0.000 / -0.250mm Thickness: +/-0.250mm std. Chamfer: 0.350 x 45o typical

Optisource excels at providing your non-standard requirements in OEM or prototype quantities

Phone: 505.792.0277 / Fax: 505.792.0281

www.optisourcellc.com

email - sales@optisourcellc.com